Working mode and software performance
|
Item |
Appearance Tester |
Remarks |
|
Shooting mode |
Multi-camera scanning (appearance 4 cameras) |
|
|
Applicable component size |
≤2,000mm*1,000mm |
|
|
Monitoring point |
before lamination, after lamination, final inspection |
|
|
Full picture time appearance |
Full picture time appearance |
long side mode |
|
Transmission direction |
Long-side feeding, non-uplifting |
|
|
Dark box |
Dark box |
|
|
Light source |
Area array backlight + area array side light source |
|
|
Transmission module |
Servo synchronization (Panasonic / Delta) |
|
|
Corrected |
X, Y two-way cylinder (SMC/AirTec) |
|
|
Power-on |
Electrode |
|
|
Power supply |
0~100V&0~10A |
|
|
Item |
EL-AI |
Remarks |
|
Image display |
partial enlargement, barcode automatic watermark embedding |
|
|
Function selection |
Normal appearance inspection, normal EL detection, and low current detection |
|
|
Multi-camera |
automatic seamless stitching |
|
|
Data |
Customize function according to defect category, defect classification automatically generates date folder, auto save |
|
|
Query |
detection history query, barcode query, date query, etc. |
|
|
Permissions |
Permissions |
|
|
Parameter |
recipe management function |
|
|
Upload |
Can use MES, FTP, network sharing and other data transmission methods |
|
|
Control |
By-Pass mode is optional, retest mode is optional |
|
|
Auxiliary algorithm |
Internal foreign objects, corners, fragments, scratches, whiteness, film spacing, etc. |
|
Basic information and factory requirements
Ø Equipment specification model: EL-AI scanning
Ø Overall dimensions: L (2.6m) * W (1.8m) * H (1.85m)
Ø Power supply: AC220V±5%, 1P+1N+1PE (1-phase 3-wire system), 10A, 50HZ
Ø Power: peak power 2.0KW, rated power 1.5KW
Ø Air source: pressure 0.5-0.8MPa clean compressed air, flow rate 1.6L/min access equipment gas pipe diameter ø10mm
Appearance image - overall
Appearance image - border area
Ø The outer frame uses a shorter exposure time to make the bar code, bus bar, solder joints, hair, etc. clearly visible;
Appearance image - cell area
Ø The cell area uses a longer exposure time to increase the signal. Brighten the battery to increase color and foreign matter differentiation;
Ø The combination of direct and diffused light makes the illumination uniform. The bus bar is evenly lit for easy detection of white
CH
EN
CH